SP100 Water Sampler

The water sampler is lightweight, rugged, easy to use, weather resistant, and requires minimal maintenance. The water samplers are designed to take a manual sample and they have the ability to backflush the sample hose once a sample has been taken.

• Overview

  FEATURES

  • Easy push-button control for exact sample size
  • One liter per minute rate at 4-foot head
  • Internal rechargeable battery
  • Pump approximately 150 liters (40 gallons) between rechargings
  • Weather resistant enclosure
  • 15' pickup hose with strainer

  Power

  The SP100 water sampler includes an internal 5AH 12V DC rechargable gel cell battery that will power the water sampler to pump approximately 19 liters (5 gallons) between rechargings. A battery charger is included with the unit and will recharge the battery within 12 hours.

  Sampling

  To provide high sample integrity, the water sample never comes in contact with any water sampler components other than the norprene and polyethylene tubing. The tubing is easy to clean and replaced. To avoid cross-contamination or lengthy decontamination procedures, simply change the inexpensive tubing between samples.

• Specifications

  SP100 Water Sampler
  Operating Temperature	32° to +158°F (0° to +70°C)
  Battery	Rechargeable 12 VDC, 5 AH Gel Cell
  Battery Life	Appoximately 1 hour of continuous sampling
  Sample Pump	Flow Rate: 1000 ml per minute at 4 ft. head Type: Peristaltic Maximum Lift: 22 ft (6.7 m)
  Pump Tube	Norprene 1/4 inch ID
  Sample Hose	15 ft (4.6 m) nylon reinforced polyethylene tubing with intake strainer
  Enclosure	Expanded UV protected PVC
  Dimensions	9x7.5x4.5 inch (23x19x11 cm)
  Weight	6 lb (2.7 kg) (Shipping Weight 7 lb (3.2 kg))

• Reviews
  Write a review

  Name

  E-mail

  Review

  Rating

   

  Enter the text
  

   

• Specification Sheets
  • SP100 Specifications Sheet