WQS Water Quality Sampling System

Price$3,164.70 (US Only)

Option

SKUDJB100K


In Stock 0 - Available for Backorder

Global Water has created a unique water quality sampling system. This system includes an easy to use lightweight triggered composite water sampler, a water quality process controller with relay outputs, and a data recorder that is Windows compatible. The compact water quality sampler system is portable for field installation and fully customizable to meet your needs.

Includes triggered WS700 composite water sampler and PC320 process controller. (NOTE: Water quality sensor not included.)

  • Overview

    FEATURES

    • Ideal for locating water quality trouble areas in wastewater, industrial, or stormwater systems
    • Easy to use interface with user selectable sensor types
    • Rugged construction for harsh environments
    • Relay outputs for alarms, sampling, or datalogging
    • Scalable water quality triggers for taking composite samples
    • Water quality sampler data recorder is Windows compatible

    Water Quality Sampler System Controller

    The Water Quality Sampler System Controller's LCD display shows the type of sensor that is being monitored, the data reading averaged over a user programmable time period, and the engineering units selected. The display also shows the current On or Off state for each of the process controller's 4 relays. Each of the process controller's relay is independently programmable to trigger on maximum and/or minimum threshold levels in one of five different control modes. Relay operation is defined by setting upper and lower sensor threshold levels and turning relays on when process controller sensor readings exceed a normally defined range. Visit the Water Quality Sampler System Controller page for more information.

    Water Quality Sampler System Sampler

    Global Water triggered Water Quality Sampler System Samplers are enclosed in rugged, rainproof, lockable carrying containers. Inside each standard water quality sampler container is a 2-gallon polyethylene waste water sample bottle for collecting composite samples, a peristaltic sampling pump, two knob control panel (No programming required) and a rechargeable gel cell battery. Other options include glass sample bottles, refrigerated containers, portable ice containers and more. Visit the WS700 Water Quality Sampler page for more information on the Water Quality Sampler System Sampler.

    Water Quality Sampler Data Recorder

    Global Water's Water Quality Sampler Data Recorder works with MS Windows software. The Water Quality Sampler Data Recorder monitors and logs both water quality value and time of the sample for your records. Data downloaded from the Water Quality Sampler Data Recorder can easily be opened in any PC spreadsheet program for analysis and graphic presentation. Visit the Water Quality Sampler Data Recorder page for more information.

  • Specifications
    Composite Water Sampler  
    Sample Size 15 composite sample sizes from 50ml to 2 liters plus a Full Bottle discrete setting (Approximate sizes at 4 foot head)
    Operating Temperature

    32° to +158°F (0° to +70°C)

    Materials Enclosure: Expanded UV protected PVC
    Bottle: 2.5 gallon Polyethylene
    Pickup Hose: 15 ft (4.6 m) reinforced PVC 1/4 inch ID polyethylene flexible tubing section with intake strainer
    Pump Tubing: Norprene 1/4 inch ID, 7/16 inch OD
    Sample Pump

    Flow Rate: 1000 ml per minute at a 4 foot head
    Type: Peristaltic
    Maximum Lift: ~20 feet (6 m)

    Battery

    Rechargeable 5 AH Gel Cell

    Battery Life ~1 hour, continuous pumping under load

    Standby

    3 months while still retaining enough power to run the pump to capacity

    Water Quality Sampler System Controller  
    Sensor Types/Units

    Level (Feet, Inches, Meters, Centimeters, Custom), Temperature (°F, °C, Custom), pH (ph, Custom), Conductivity (uS, mS, Custom), Dissolved Oxygen (%, mbar, ppm, mg/L, Custom), ORP (mV, Custom), Turbidity (NTU, Custom), Wind Speed (MPH, KPH, Ft/Sec, M/Sec, Custom), Wind Direction (°, Custom), Humidity (%, Custom), Solar Radiation (W/M², Custom), Pressure (mbar, hPa, inHg, PSI, Pa, Custom), Custom (Custom)

    Display/Keypad 16 Character x 2 Line Backlit LCD, 8-Button Tactile Keypad
    Sensor Resolution 7 Digit Maximum, Auto-Floating point
    Accuracy Sensor Accuracy + 0.1% + 1 Digit
    Analog Sensor Input 2-Wire or 3-wire, 4-20mA, 0-5VDC, 0-1VDC
    Analog Output 4-20mA Scalable
    Output Relays 4 Independent SPDT Relays
    Contact Rating 8A @ 250VAC, 5A @ 30VDC Resistive
    Power Voltage: 12VDC or 18-24VDC Input, +/-10%
    Supply Current: 13mA + Sensor Current + Backlight + 4-20mA Output
    Water Quality Sampler Data Recorder  
    NOTE

    WQS100 does not include datalogger

    Memory Non-volatile flash memory
    Power 12VDC rechargeable battery
    Standby Current 70uA Typical
    Logging Current 5mA Typical
    Analog Sensor Inputs

    4-20mA
    Resolution: 12-Bit, 4096 Steps
    Sensor Warm-up Time: Programmable, 0-60 Sec
    WQS200: Water quality sensor + relay state + battery voltage monitor
    WQS300: Water quality sensor + relay state + battery voltage monitor + 5 extra input channels

    Digital Inputs Maximum Input Voltage: 24VDC
    Maximum Frequency: 100Hz
    Minimum Pulse Width: 2mS
    Maximum Count: 65,535 (16-Bit)
    WQS200: None
    WQS300: 2
    Sample Now Input Sample-on-Demand input, software enabled (WQS300 only)
    Maximum Input Voltage: 24VDC
    Minimum Pulse Width: 2mS
    Sample Modes

    Fixed Interval Programmable from 1 Sec. to >1 Year
    High Speed 10 Samples per second
    Logarithmic Sample Rate (Approximation)
    Exception (Log only on deviation from previous reading)

    Storage Capacity WQS200: 81,759 Recordings for all inputs plus time stamp
    WQS300: 40,879 Recordings for all inputs plus time

    Data Overwrite: Select memory wrap or unwrap (unwrap will stop logging data once memory is full)
    Communication Ports

    WQS200: USB Type B connector
    WQS300: RS-232 DB9 or USB Type B
    Selectable Baud Rates: 9600, 19200, 28800, 38400, 57600, 115200

    Clock

    Synchronizes to the time and date of user's computer

    Operating Temperature Industrial, -40 to +185°F (-40 to +85°C) (Battery may not apply)
    Data Logger Software  
    Compatible with Microsoft's Windows 98, ME, 2000, NT, XP, Vista, and 7

    Windows and Excel are trademarks of the Microsoft Corporation

    Tabular Display/Printout

    Data in standard spreadsheet format (.CSV)

    Programmable alarm start and stop times

    Field calibration software and help files included
    Mechanical  
    Enclosure 22x17x9 inch (56x43x23 cm) (HxWxD)
    Weight

    21.5lb (9.75kg)

     

  • Accessories
  • Reviews
    Write a review
     

     

You may also need

WS Series Auto Samplers

Automatic Stormwater or Wastewater Sampler

$1,968.75 - $2,546.78

ProSwap Digital Water Quality Meter

Portable Digital Handheld Meter for Single Parameter Sampling of DO, Conductivity, Salinity, TDS, pH, Turbidity, Algae, Temperature and more

$1,103.00 - $1,391.00

ProQuatro Multiparameter Meter

Portable Sampling Handheld Meter for DO, Conductivity, Salinity, TDS, pH, ORP, Ammonium, Nitrate, Chloride, Temperature and more

$1,257.00

FSS Flow Sampling System

Flow Sampling System

$3,321.15 - $3,601.50

SP100 Water Sampler

The portable water sampler is ideal for removing samples from shallow wells and surface water sources, including lakes, ponds, and holding pools.

$744.45