EP180 Evaporation Pan

Price$2,108.00 (US Only)


In Stock 0 - Available for Backorder

Global Water's Evaporation Pan is built to be compatible with all standard National Weather Service pan evaporation measurements. The EP180 is a Class A Evaporation Pan that features a drain plug and an attached stilling well for easy installation of a water level sensor, like Global Water's WL400 (3 ft range).

  • Overview


    • Rugged
    • Fully submersible
    • Ideal for water spills, tank failures, pump failures, rising water, and floods

    The EP180 is normally installed on a wooden platform set on level ground. There are two commonly used procedures for making evaporation measurements. In both procedures, a 10 inch Deep x 47-1/2 inch ID stainless steel pan (like the EP180) is used to hold the water. Since the amount of evaporation is a function of temperature, humidity, wind, and other conditions, in order to relate the evaporation to current or expected conditions, the maximum and minimum temperature of the water and the amount of air passage are normally recorded along with the evaporation.

    Global Water offers water level sensors, water temperature sensors, weather sensors, and datalogging capabilities to complete an evaporation monitoring system.

  • Specifications
    Construction Low carbon stainless steel passivated after welding, heliarc welded

    47.5" dia. x 10" deep (121 cm dia. x 24 cm deep)

    Weight 48 lbs (22 kg)

You may also need

WE100 Barometric Pressure Sensor

Barometric Pressure Sensor


LW100 Leaf Wetness/Rainfall Sensor

Monitor Leaf Moisture and Rainfall

Request Pricing

RG500 Auto Drain Rain Gauge

Auto Drain Rain Gauge


RG600 Tipping Bucket Rain Gauge

Tipping Bucket Rain Gauge

Request Pricing