SDI-12 Rain Gauge

WaterLOG Precipitation Gauge

• Overview

  Whether you're new at rain measurement technology or know the systems like the back of your hand, you'll love the features of the SDI-12 Tipping Bucket Rain Gauge (H-3401)—such as the built-in microprocessor that automatically corrects errors. It also has a magnetic reed bucket tip sensor and an internal leveling mechanism with a 'bulls-eye' level to ensure high accuracy data. The Rain Gauge is available in .01 in., 0.1 mm and 0.2 mm resolution ranges.

  SDI-12 Output Data Parameters:

  1 - Accumulated rainfall since last measurement
  2 - Raw bucket count since last measurement
  3 - Total accumulation
  4 - Total daily accumulation (today)
  5 - Total daily accumulation (yesterday)

• Specifications

  Connectivity / Communications	SDI-Output. Baud Rate: 1200; Protocol: SDI-12, version 1.3; Output voltage levels: Min High level: 3.5 volts, Max low level: 0.8 volts, Max cable length: 250 ft (76 m)
  Connector	Screw Clamp, for #12-22 AWG wire
  Operating Temperature	Electronic: -40 ° to +60 ° C; Mechanical: 0 ° to +50 ° C
  Power	Power Requirements: Voltage Input 10.0 to 16.0 volts DC Standby: 180µA typical; Current Raining: 2.8 mA for 60 seconds Communication: 6 mA
  Storage Temperature	-50 ° to +70 ° C
  Warranty	2 years

• Brochures and Catalogs
  • HydroMet Brochure | D86-04
  • Stormwater Solutions Brochure | XA00162
  • Stormwater Solutions Brochure | XA00162 - French
  • Surface Water Capabilities Brochure
• Guides
  • WaterLOG SDI-12 Rain Gauge Getting Started Guide
• Manuals
  • H-3401-Tipping Bucket User Manual | D61
  • WaterLOG Rain Gauge Getting Started Guide
• Specification Sheets
  • SDI-12 Rain Gauge Specification Sheet | D08
• Technical Notes
  • Connecting ProSample to Rain Gauge Using SDI-12 Output | XA00019