Ecowatch Lite - for Windows 32-bit Operating Systems (x86)
v1.0.0.0 - 14Feb2013

Install right from your browser or download a ZIP file to install later.

Ecowatch Lite - for Windows 64-bit Operating Systems
v1.0.0.0 - 14Feb2013

Install right from your browser or download a ZIP file to install later.

KOR Software for EXO Systems

KOR Software is on a USB flash drive that ships with the EXO systems. Updates to KOR are downloaded from EXOwater.com, along with sensor and handheld firmware updates. Updates to KOR for the EXO handheld are accessible through the KOR desktop software menus.

The KOR software update (Jan. 2013) provides EXO users new features and additional improvements to the desktop and handheld versions.  Visit EXOwater.com for more details.

3200 Firmware - v2.3 - 27Jul1999

Firmware for the 3200 Laboratory Conductivity Instrument.

5000 and 5100 Firmware Update - v2.0 - 24Sept1998

Firmware update for 5000 and 5100 Lab Dissolved Oxygen meters.

5200 Firmware Code Updater - v4.00.00 - 24Apr2007

Firmware Code Updater for the 5200 Continuous System Monitor.

Caution: If you are using the AUX inputs on your current setup of the 5200, you will need to send the instrument to YSI for an upgrade.  The firmware that is downloaded will not allow the AUX ports to be as accurate as your current setup so YSI will perform a calibration.  Please contact Technical Support, environmental@ysi.com, for a Service Request number to get your 5200 upgraded and calibrated.

Data Scout Advanced - v2.0.2 -

Software for the Level Scout.

EcoWatch - v3.18 - 14Apr2006

EcoWatch Software

Important Instructions for Windows 7 64-bit users

IQ SensorNet Profibus GSD File - v1.22 - 06 July 2005

IQ SensorNet Software Pack - v16 - Apr 2012

Updates PC Terminal program including Config/Save Load and Datalog Transfer.

IQ SensorNet Software Pack Connect - v1.00 - Nov 2012

Updates PC Connect program including Config/Save Load and Datalog Transfer.

IQ SensorNet Software Update "Update Pack (L1)" - v1.22 - Apr 2013

Updates IQ SensorNet modules, probes, terminals and controllers. 

Level Scout Firmware - v2.3 -

Firmware for the Level Scout

ProODO Code Updater - v3.3 - 12 Dec 2012

Firmware updater for Professional Series ProODO Instrument.

Update Instructions [PDF]

ProODO Code Updater - Probe - v2.0 -

Firmware Updater for ProODO Probe.

Update Instructions [PDF]

ProPlus Software Updater - v4.00 - 12Jun2012

These instructions describe how to update the Professional Plus software to version 4.00.

Minimum PC system requirements are:

• Windows® 2000 with SP4 (minimum) or XP with SP2 (minimum) Operating System
• USB 2.0
• Microsoft .NET™ (installed with Data Manager)
• YSI USB drivers for the Professional Series Communications Saddle (installed with Data Manager)

Complete the following steps to update a Pro Plus handheld to software version 4.00:

1. If not already installed, install the USB drivers for the Pro Comm II communications saddle and Data Manager on your PC via the CD that was included with your instrument.  After installation, connect the communication saddle to the Pro Plus and then connect the saddle to the PC’s USB port with the USB cable provided.  Windows may require you to step through two ‘New Hardware Found’ wizards in order to complete the USB driver installation.  Once complete, remove the instrument from the saddle and disconnect the saddle from the PC.
   
   
2. Select one of the seven different ProPlus v4.00 zip files available below that include your desired language sets. It is only necessary to download the one file you need. The language combination options are:
   • English, French, German
   • English, Italian
   • English, Japanese, Chinese
   • English, Norwegian
   • English, Polish, Turkish
   • English, Spanish, French
   • English, Spanish, Portuguese
     
     
3. To continue updating your ProPlus Instrument, download the full instruction sheet: ProPlus Software Update Instructions

ProPlus Updater - English, French, German - v4.00 - 12Jun2012

ProPlus Updater - English, Italian - v4.00 - 12Jun2012

ProPlus Updater - English, Japanese, Chinese - v4.00 - 12Jun2012

ProPlus Updater - English, Norwegian - v4.00 - 12Jun2012

ProPlus Updater - English, Polish, Turkish - v4.00 - 12Jun2012

ProPlus Updater - English, Spanish, French - v4.00 - 12Jun2012

ProPlus Updater - English, Spanish, Portuguese - v4.00 - 12Jun2012

YSI Code Updater - v2.0.170 - 9 Feb 2012

YSI Code Updater applies firmware updates to multiple instruments including:

Note: If you are currently running or have sondes that in the past have run any firmware version  from 2.20 through 3.05, please follow this new operational procedure:

1. Using Ecowatch, upload all files on the sonde to your computer.
2. Upgrade the sonde to the current version.
3. Using Ecowatch, delete all files on the sonde.

6000 Firmware - v3.18 - 28Sept1998

Firmware for the 6000 (obsolete).

610D &610DM Firmware - v2.5 - 11Jul1999

Firmware for the 610D and 610DM handhelds (obsolete).

ADV6600 Firmware - v2.3 - 17Nov2003

Firmware for ADV6600 Sonde (obsolete)

ADVantage 6600 - v1.10 - 17Nov2003

Data Processing Software for use with ADV6600 (obsolete).

BOD Analyst Update - v1.0.8 -

Updates BOD Analyst Software to Version 1.0.8.

BOD Analyst Pro is now available!

Data Manager Software - v1.1.8 - 12Sept2011

Software for Professional Series Instruments.

Data Manager Software Update

Attention Windows 7 Users: Instructions for Porting Data from Windows XP Virtual

Data Scout - v2.0.1 - 5Aug2010

Desktop Software for use with the Level Scout.

Data Scout Mobile - v2.0.1 - 5Aug2010

A Pocket PC version of Data Scout for use with the Level Scout.