YSI 5200 Continuous Monitor - Multiparameter Monitoring and Control Instrument

Designed specifically for Aquaculture Systems, the YSI 5200 and AquaManager™ Software integrate process control, alarming, and data management into one product. Simple enough to monitor one tank, powerful enough to manage a full scale farming operation from anywhere in the world. Simultaneously measure dissolved oxygen, pH, conductivity, ORP, salinity and temperature.

YSI 5200 Continuous Monitor mounted in the field

Find a Distributor

YSI has Authorized Distributors all over the globe. View a map and find your closest contact for YSI 5200 products and accessories.

Get Support

Have a question about your YSI 5200? Check out the support page with resources compiled just for you.

Product Service Centers

Want to return a product for service? Here you’ll find authorized service centers and instructions on how to send in your YSI 5200.

Optional AquaManager™ Windows™-based software links data management, system management, and networking to the desktop and internet. Browser-based format makes navigation, setup and maintenance easy.

The 5200 is a fully scaleable system - simply add units as your operation grows.

Features

Multiparameter: DO, Temperature, Conductivity, pH, ORP, Salinity
Four Timers
Multi-instrument networking capability via RS-485
Flexible dosing and control software
Four 10-amp control relays

Pond monitoring has never been easier with the 5200 and the 5567 wiper/stirrer. Save energy and maintenance with the 5200 and the 5567 controlling your paddle wheels or aeration system.

Recent Upgrades

Conditional feed timer with FCR and biomass settings and calculations finally centralizes your system and decreases costs while improving the efficiency of your whole operation
Improved network capability and reliability
Faster DO and conductivity calibration routines
Enhanced auxiliary input capabilities – any analog device can be set up to read out on the display along with alarming and control

YSI 5200 Instrument General Specifications

Auxiliary Inputs		2 ea inputs - 1 selectable digital or analog (0 to 1.0 VDC or 0 to 5.0 VDC selectable) 1 ea digital (contact open/close w/current source)
Certifications		UL, CUL and CE
Communication Ports		1 ea RS-485 Full Duplex 1 ea RS-232-C Serial Communication
Data Logger		32K Memory – 750 sample data sets User selectable save rate
Dimensions		6.5 x 8.5 x 4.75 in (h x l x d)
Display		2 x 16 character, extended temperature range LCD with backlight
Instrument Operating Ranges	Enclosure	NEMA 4X Enclosure
	Environment	Direct exposure to outside conditions
	Temperature	- 15 to 70ºC (23 to 158 ºF)
Output Relays		4; 5 amp 230 VAC (10 amp 120 VAC) relays for parameter, control and/or alarm
Power Requirements	Nominal	12 VDC
	Operating Range	8.5 to 16.5 VDC (below 8.5 VDC uses optional battery back up)
	Operating Current	500 - 800 mA depending on mode of operation
Software	AquaManager	Windows 95, 98, ME, NT 3.51, NT 4.0, 2000, and XP
	Autopoller	Windows 2000 and higher
Timers		4 ea General purpose timers, 1 start & 1 stop time per 24 hour period 4 ea Feed timer with conditional settings for DO, Temp and pH (feeder not supplied)
Warranty		2-year on instrument 1-year on probes and cable

YSI 5200 System Specifications (Instrument with Cable & Probe)

	Sensor Type	Range	Accuracy	Resolution	System Response Time
Dissolved Oxygen	Membrane covered steady state polarographic	0 to 500% air saturation 0 to 60 mg/L	±2% or ±0.2 mg/L, whichever is greater (0–200%) ±6% of reading (200–500%)	0.1% or 0.01 mg/L (0–10 mg/L) 1% or 0.1 mg/L (10–60 mg/L)	98% of reading in 5 minutes
Temperature	10,000 ohm @ 25 ºC thermistor	-0 to 45°C (32 to 113°F)	±0.2°C	0.1°C
Conductivity	4 electrode, Cell constant of 5.0 ±5%	0-200 µS 0-2000 µs 0-20 mS 0-200 mS	±0.5% of range (0-100 mS) ±1.0% of reading (100-200 mS)	1.0 µS, 0.1mS Range dependent
Salinity	Calculated from conductivity and temperature	0 to 80 ppt	± 2 % or ± 0. 1 ppt	0.1 ppt
pH		0 to 14 units	±0.2 units	0.01 units
ORP		-1000 to +1000 mV	±10 mV	1 mV

		3682 Zobell ORP Calibration Solution YSI 3682 Zobell solution is used for calibrating ORP/Redox on several YSI instruments.

		5580 Confidence Solution® Never worry about the accuracy of your pH, ORP, or conductivity data again! Ensure probe performance with the 5580 Confidence Solution®.

		5909 DO Cap Membrane Kit YSI 5909 screw-on cap dissolved oxygen membranes.

Form Object

<< Back to Products page

Manuals

Specification Sheets

Catalogs & Brochures

Application Notes

3682 Zobell ORP Calibration Solution

5580 Confidence Solution®

5909 DO Cap Membrane Kit