Desalination-Water-Quality-Monitoring

While the end result of desalination is clean and useful water, there are several aspects of the process which need to be carefully controlled and monitored so as not to negatively impact the environment. It is at these pre- and post-treatment stages where YSI instruments can provide valuable data.

Please fill out the form below to be added to our desalination list.

E-mail Address:	*
First Name:	*
Last Name:	*
Organization:	*

Find a Distributor

YSI has Authorized Distributors all over the globe. View a map and find your closest contact for YSI Desalination products and accessories.

Get Support

Have a question about using your YSI equipment in Desalination? Ask our application specialists!

Product Service Centers

Want to return a product for service? Here you’ll find authorized service centers and instructions on how to send in your YSI Desalination product.

Feasibility/Design: The study or research phase where water currents and salinity need to be monitored, measured, and modeled. A water quality sonde, monitoring buoy, and/or current meter can reliably provide the required baseline data.

In-Process: Outside the plant, a water quality monitoring system can monitor turbidity or salinity levels right before the water is drawn into the plant. Inside the desalination plant, a water quality data display can be used to check the intake, pre-filtered, and/or treated water.

Effluent/Compliance: Water quality sensors, datalogger, and buoys with telemetry can be used to monitor brine discharge at the outfall in order to maintain compliance.

		6600V2 Make the most of your environmental monitoring. The 6600 V2 sonde is the most comprehensive water quality monitoring equipment available with simultaneous measurement of conductivity (salinity), temperature, depth or level, pH/ORP.

		6820 V2 Compact Sonde for Field Sampling The YSI 6820 V2 is a cost-effective sonde for profiling and spot-checking in rivers, lakes, wetlands, wells, estuaries, and coastal waters. Two versions are available: 6820 V2-1 has one optical port, conductivity/temperature port, Rapid Pulse DO port, pH/ORP port, and 3 ISE ports 6820 V2-2 has 2 optical ports, conductivity/temperature port, pH port, and one ISE port.

		600XL and 600XLM Small Package - Economical Sampling or Logging Both the YSI 600XL (sampling) and the YSI 600 XLM (logging) are economical solutions in small packages for surface water and groundwater applications. Both easily fit into 2-inch wells and measure a range of fundamental parameters, including oxygen - with the YSI Rapid Pulse™ stirring-independent dissolved oxygen sensor - and level, using a highly-accurate vented sensor.

		6500 Process Monitor Improve Operational Efficiency with Continuous Data With 8 scalable 4-20 mA current loop channels, 4 SPDT relays, and the ability to continuously monitor dissolved oxygen, conductivity, temperature, and pH via a YSI 6-Series sonde, the YSI 6500 helps you stay one step ahead in data collection.

		EcoNet Manage Data with Web-Enabled Remote Monitoring and Control Make instant, meaningful decisions without the need for additional costly resources or time-consuming trips to the field. Instruments throughout your environmental monitoring system send a continuous stream of data to YSI EcoNet hardware, which automatically transmits the information to a secure server and posts the data directly to a website.

		Buoys & Floating Platforms As part of a complete environmental monitoring system, water quality buoys and floating platforms from YSI provide mounting for: telemetry and data acquisition electronics water quality and meteorological sensors solar panels battery packs antennae mooring assembly and beacon